Basic Installation ================== The first part of this file contains are generic installation instructions. For plattform specific guidance and other specialties see the end of the file. Please also consult the SETUP file for a quick guide to the documentation of the package. In particular, you should check the README for the prerequisite packages to install. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. Configuration options specific to the meteo package =================================================== The configure script supports the following options specific to the meteo package: --with-browser-dir=DIR set the directory where the meteobrowser php script should be installed. If this option is not specified, the script is not installed. --with-html-dir=DIR set the directory where the HTML files should be installed, this is primarily useful on the site http://meteo.othello.ch, where it is used to keep the web site up to date. The XML library libxml2 is required, but there does not exist a configure option to specify the library. You should make sure that the xml2-config script is found on the PATH. The configure script will use that program's output to correctly set compiler and linker flags to include and link libxml2. Likewise for the MySQL library, make sure the program mysql_config is found on the path. The GD2 library uses the program gdlib-config, which is usually in /usr/local/bin, make sure the program is found during the configure step. As a consequence, zlib and libpng are no longer detected by the configure script, the script just assumes that they exist where the config scripts for mysql and gdlib think they are. Special issues ============== There will be lots of warnings about deprecated headers when compiling with gcc 3. The source code uses the old header file names to make sure compiling with gcc 2.95.3 will work. The binary programs of this package are all installed in bindir, and the manual pages in mandir. The sample configuration file meteo.conf.5 and the HTML pages are not installed anywhere, and must be moved by hand to where you prefer. I usually place the configuration file in /usr/local/etc, and the HTML pages in DocumentRoot/meteo for the virtual server through which the graphs should be accessed. If you want to use the meteobrowser.php script, you should name your configuration files meteo-.conf, as this is what the script assumes (the directory containing the script is configurable). The installation of the meteo browser (the PHP script meteobrowser.php) has not been automated, it must be copied manually to suitable place inside the webserver hierarchy. A sample start/stop script to place in /etc/init.d (or wherever your system likes to keep those) is also supplied as rc.meteo. There is an sql script in the db directory that helps to set up the database tables, please read db/README for more information. Plattform specfic guidance ========================== Solaris: On Solaris, gcc 3 must be configured to use the GNU linker and assembler. If configured with the Sun linker/assembler, the resulting meteopoll binary will crash as soon as an invalid humidity value is read from the station. Note that the gcc from sunfreeware.com uses the Sun tools, so you will have to build a new compiler configured with --with-gnu-ld and --with-gnu-as. The Solaris Bourne shell is limited in that it is unable to correctly execute the config.guess script (needed for libtool). Set the CONFIG_SHELL environment variable to something more reasonable like the Korn shell (/usr/bin/ksh) or, even better, the Bash /usr/local/bin/bash (or wherever you have installed it). This may no longer be a problem with Solaris 8 and/or the current version of autoconf and the configure script created by it, but I haven't tried. There may be lots of warnings during the compile about alignment of data types, these can be ignored. They are not caused by any meteo code, but come from the string class implementation that comes with gcc. The problem encountered with Mac OS X (SED not set correctly) described below has also been reported to occur with some versions of Solaris 2.6. Sometimes the message queue size on Solaris is not large enough (there are only about 3 to for messages that fit into the available space), so you may want to increase that size. Unfortunately, these are not dynamically tunable parameters even in Solaris 9, so you must add the following lines to /etc/system set msgsys:msginfo_msgmnb=524288 set msgsys:msginfo_msgtql=500 This allows 500 messages in the system takeing up a total of 512kB. Linux: Some Linux distributions have the gd library compiled with freetype support. Consequently, the meteo programs must be linked against the freetype library, which means that the development packages for freetype must be installed as well. Note that gd2 is not very old yet, and only recent Linux distributions already include it. Installing it in addition to gd, e.g. under /usr/local, usually does not do any harm and simplifies gd based development. In Linux, the message queue size is dynamically adjustable, just write the desired size to /proc/sys/kernel/msg{max,mnb,mni}. Mac OS X: There seems to be a problem with libtool on this platform, somehow it does not find a working sed, resulting in very strange error messages about -e not being found. Set the environment variable SED to /usr/bin/sed: $ export SED=/usr/bin/sed (if using sh/bash) % setenv SED /usr/bin/sh (if using csh/tcsh) You also have to make sure everything needed by configure is on your PATH. I usually forget to do export PATH=/usr/local/bin:/usr/local/sbin:${PATH} If you have xml2-config, mysql_config and gdlib-config in other strange locations, make sure they are on your PATH. Due to a bug in the dynamic linker, late binding sometimes does not work when the STL is used in C++ programs. This affects the meteodraw program, which just hangs in the construtor that creates the Graphics object. One workaround is to include -bind_at_load in the linker command line. This is not done automatically by the configure script. Alternatively, on can invoke the program with the environment variable DYLD_BIND_AT_LAUNCH set to 1. When using the meteobrowser on Mac OS X, you will have to modify the meteobrowser.php script to set the DYLD_BIND_AT_LAUNCH environment variable to 1. In some cases, meteo seems not to link at all. After some experiments, I blame the build tools (automake/autoconf/libtool) for this, apparently a tarball generated with the versions on my SuSE Linux 8.2 development machine does not link, while the tarball generated on the Mac OS X Jaguar does. For this reason, a separate distribution tarball is provided for Mac OS X. Frequently asked questions ========================== 0. How do you configure meteo? Starting with 0.7.0, the package includes a script configureit, which I use to configure the package. It sets all the compiler options I like, and calls configure with the right paths for my installation. Use this as a start for your own experiments. I usually create such a file in every package I install, it nicely documents the options I was using when building the package. 1. I've MySQL installed on my system, but the configure script does not find it. Starting with 0.7.3, the configure script uses mysql_config to find the right compiler and linker flags. For this to work you must make sure mysql_config ist found on your PATH. Detecting GD2 now works the same way, using gdlib-config, which is often in /usr/local/bin. 2. I've tried various settings of CPPFLAGS and LDFLAGS, but configure still does not find the headers or libraries. Some Linux distributions separate libraries and headers into different RPMs, e.g. SuSE Linux has a mysql-shared package (containing the shared mysqlclient library) and a package mysql-devel, which contains all the headers. You may be using MySQL on your system even without mysql-devel being installed, but to compile a program that uses MySQL, you must install mysql-devel first. 3. The dequeuer does not start The most common problem with the dequeuer is that it expects the message queue file to exist. The message queue id is derived from a file name in the file system, which you must create manually. Sometimes IPC resources don't get cleaned up properly, so they must be removed manually (this is a known deficiency of System V IPC, for details read section 14.6 of `Advanced Programming in the Unix Environment' by W. Richard Stevens). See ipcrm(8). 4. How about current values from the station meteo 0.9.15 includes an new interface which allows to read the current data from the station. For this, meteopoll writes a map file in XML. Other processes can read this file and convert it to a more user friendly format. - by default, no map file is created. Add the -m option to meteopoll to tell it to create a map file - install current.cgi and current.xsl from the browser directory according to the directions in current.cgi -- $Id: INSTALL,v 1.26 2006/05/16 11:19:53 afm Exp $